Glass fibre epoxy putty 750 gr -Fibre reinforced epoxy filler

Epoxy Fiberglass Filler grey A+B 750 G


Deliverable in 1-5 working days

Is a 2 component solvent-free fibre reinforced putty based on epoxy. This putty can be applied in layers up to 10 mm without shrinking. Available in 750 kg and 7.5 kg containers.




Excellent for repairing damage above and below the waterline on steel, hardwood, polyester and concrete. Excellent for osmosis repair on polyester boats. Aluminium, steel and GRP substrates should first be pre-treated with Epoy Light Primer.


The surface must be clean, dry and grease-free. Mix both components in a 2/1 volume ratio or 100:50 by weight and process within 50 min at 20°C. Apply with a spatula. Depending on the substrate and quality, sand, sand or use light primer. Sandable after 16 hours at 20°C. Never process below 10°C.
Always provide appropriate protective clothing and gloves. Avoid prolonged skin contact. Cleaning agent for tools: cleaner M (eco-friendly substitute for acetone).

Technical specifications

Download technical fiche