Epoxy filler - Epoxy filler and finishing filler 750 ml

Epoxy Lightweight Filler white A+B 750 ML


In stock

Is a 2 component solvent-free lightweight putty based on epoxy (0.8 kg/litre.) This putty can be applied in layer thicknesses up to 10 mm without shrinking. Available in 750 ml and 7.5 kg packaging.

€43.58 / set



Excellent for repairing damage above and below the waterline on steel, hardwood, polyester and ferro-cement. Also suitable for osmosis repair on polyester boats. Aluminium substrates should first be pre-treated with epoxy Light Primer.


The surface must be clean, dry and grease-free. Mix both components in a 1/1 volume ratio or a 100:100 weight ratio and process within 50 min at 20°C. Apply with a spatula. Depending on the substrate and quality, sand or sand first. Sandable after 24 hours (20°C). Water loadable after 48 hours. Never apply below 10°C
Always provide appropriate protective clothing and gloves. Avoid prolonged skin contact. Cleaning agent for tools: cleaner M (eco-friendly substitute for acetone).

Technical specifications

Download technical fiche