Epoxy putty - Epoxy filler and finishing putty 750 g

Epoxy Universal Filler grey A+B 750 G


In stock

Is a 2 component epoxy finishing putty for filling unevennesses and holes in polyester, epoxy or wood for both above and below the waterline of the boat.

€40.21 / set



For smoothing out on e.g. boat or moulded parts. Shrink-free and well sandable, fast curing finishing putty. Has excellent adhesion to wood, metal, GRP, aluminium, PU foam and other synthetic surfaces.


  • Mix the two components in a 2/1 volume ratio or a 100:44 weight ratio. 
  • Potlife: Approx. 40 min. at 20°C and a min. temp. of 10°C. 
  • Dry after 15 hours at 20°C and fully cured after 7 days. 
  • Apply with a spatula on a dust- and rust free underground as dry as possible, in a maximum layer thickness of 10 mm. 
  • Each additional layer may be 10% thicker than the underlying layer. 
  • Processing temperature: 15-20°C. 
  • Can best be sanded afterwards with P80-P120 for general bonding and with P120-P240 for fine finishing. 
  •  Use Lightprimer for further finishing.

    Caution: do not add more hardener than indicated.
Always provide appropriate protective clothing and gloves. Avoid prolonged skin contact. Cleaning agent for tools: cleaner M (environmentally friendly substitute for acetone).

Technical specifications

Download technical fiche