Polyester putty - For finishing and filling
Ferro Multi + BPO 2 KG
UPP02070045
In stock
Is a 2 component universal polyester putty with a filling effect and with a fine finish. Easy to sand with little dust formation when sanding. After curing, you get a completely tack free surface.
Available in packaging of 2 kg and 10 kg.
Available in packaging of 2 kg and 10 kg.
€31.23 / set
Applications
Very fine finish for unevenness in metal, polyester, tin-plated and galvanised sheet. The ferro multi has a good adhesion on galvanised steel, aluminium, steel and light metal surfaces. Should be finished with an appropriate paint system.
Usage
- Substrate must be dry and free of dust and grease.
- Mix the polyester with 2-3% BPO hardener and apply this mixture with a spatula.
- Can already be sanded after 20-30 min.
- Potlife: 4-5 min. at 20°C.
- Processing temperature: min. 10°C.
- After curing resistant to temperatures up to 80°C.
- Maximum layer thickness 5 mm.
Note: all polyesters can be slowed down with inhibitor.
Safety
This product contains styrene and must therefore be handled in accordance with the safety instructions.