Polyester spray putty - For fine finishing and filling
Ferro Spray + CHP 1,5 KG
UPP02150003
In stock
Is a 2 component polyester spray putty with a filling effect, very good sandability and little dust formation when sanding.
Available in 1,5 kg packaging.
Available in 1,5 kg packaging.
€19.60 / set
Online advice 
Fast delivery from stock 
Guaranteed V-sure quality 
Direct from manufacturer - Pick-up 24/7 in pick-up box
Applications
As a sprayable finishing putty after a polyester repair or for on wood, metal, concrete or GRP. Smooth finish and soft sandable. Can be applied without primer on polyester and can be further finished with an appropriate paint system.
Usage
- Substrate must be dry, dust- and grease free.
- Mix the resin with 3.5% CHP hardener and process this mixture within 15-20 min. at 20°C.
- Can already be sanded after 120-180 min.
- To be diluted 2.5% with Spray Thinner .
- At a spraying pressure of 3-4 bar and with a spray nozzle of: 2-3.5 mm.
- After curing, resistant to temperatures up to 80°C.
Note: all polyesters can be slowed down with inhibitor.
Safety
Technical specifications
Related products
