Gelcoat repair kit - for repairs above the waterline - RAL 9010
Gelcoat repair Filler Dry fast 9010 250 G
UPH01040902
In stock
This product is no longer available and can be replaced by the Gelcoat Repair Kit from V-Sure.
€29.68 / st
Applications
Finds its application in boat building. For fixing, filling and repairing gelcoat above the waterline. For fast and durable repairs on polyester. Do not apply to 1-component paints or surfaces that could be affected by solvents.
Usage
- The surface must always be dry and free of dust and grease.
- Mix the polyester with 2% hardener and apply this mixture with a rubber spatula.
- Can already be loaded after 2-3 hours.
- Potlife: 10-20 min at 20°C.
- Always make small quantities in proportion to the potlife.
- Processing temperature: 15-20°C.
- Apply a maximum of 0.4 -1.0 mm per layer.
- If necessary, sand between layers to improve the adhesion.
Attention: Do not add more hardener than indicated.
Safety
This product contains styrene and must therefore be handled in accordance with the safety regulations.