Fibre-reinforced polyester putty - strengthening and filling 250 g

Polyester Filler Fibreglass Low styrene + BPO 250 G


No longer available

This product is no longer available but can be replaced by V-Sure's fiber-reinforced V11 filler.

€9.02 / set



Highly sandable filling putty with improved filling and smoothing properties. Has a direct adhesion on wood, metal, aluminium and galvanised surfaces and GRP. Can be finished with fine finishing putty e.g. SL polyester filler universal and then with an appropriate paint system.


  • Substrate must be dry and free from dust and grease. 
  • Mix the filler with 2-3% BPO hardener and apply the mixture with a spatula.
  • Potlife: 4-7 min. at 20°C. 
  • Minimum processing temperature: 10°C.
  • Can be sanded after 20-30 min. 
  • After curing, resistant to temperatures up to 80°C.
  • Avoid overdosing the hardener with the putty, as too much hardener can affect the adhesion and lead to discolouration.

Note: All polyesters can be slowed down with inhibitor.
Always wear suitable protective clothing and gloves. Avoid prolonged skin contact. Cleaning agent for tools: cleaner M (environmentally friendly substitute for acetone). This product contains styrene and must therefore be handled in accordance with the safety regulations.

Technical specifications

Download technical fiche