Polyester resin primer 250 g for PVC with hardener

PVC Primer 250 GR + Mekp


In stock

Is a 2-component, pre-accelerated primer based on iso-neopentylglycolic acid. Gives an improved adhesion on PVC.

Available in 0.25 kg + mekp and 1 kg + mekp.

€15.83 / set



Adhesive layer for laminating on PVC. As extra waterproofing, finishing and chemical resistant layer. Can be applied on all skimmers, nozzles, light holders, ... To be finished with polyester/vinyl ester and glass mat.


Mix the resin with 2-3% Mekp hardener. Brush or roll out as thick as possible. Potlife: Approx. 15-20 min. at 20°C. Always make small quantities in proportion to the potlife. The resin remains slightly sticky so that there is better adhesion to the laminate.

Can be worked over after 1-2 hours.
Processing temperature: 18-25°C.
Always provide appropriate protective clothing and gloves. Avoid prolonged skin contact. Cleaning agent for tools: cleaner M (environmentally friendly substitute for acetone).
This product contains styrene and must therefore be handled in accordance with the safety regulations.

Technical specifications

Download technical fiche