Casting rubber - very soft liquide silicone rubber

Silicone Silskin ZA 10 A+B 2 KG


In stock

Is a transparent 2 component highly elastic, self-demoulding casting rubber based on silicone that reacts after the addition of the polyaddition hardener. This rubber has a skin-like hardness.

Available in 1+1 kg and 5+5 kg packaging.



For the manufacture of special effects that can be modified in combination with the Deadner to produce a self-healing effect. Can also be used as casting material. Is thinly liquid and can be poured easily. Has a low shrinkage and is very thin liquid. Already de-mouldable after 30 minutes. Can be coloured with silicone colour pigments. Resistant to temperatures from -40°C to 200°C.


  • Always ensure a dry and grease-free surface.
  • Mix both components in a 1:1 weight ratio.
  • Then pour the mixed rubber over the object. 
  • Potlife: Approx. 7 minutes at 23°C.
  • Dry after 30 minutes, fully hardened after 24 hours. 
  • If in doubt about the substrate, it is best to make a test piece or to use release agent Trennspray. 
  • Be careful with plasticine based on phosphor and sulphur.
  • Some types of vaseline oil can have a delaying effect.
Always provide appropriate protective clothing and gloves. Cleaning agent for tools: cleaner M (environmentally friendly substitute for acetone).

Technical specifications

Download technical fiche