Polyester putty - For a very fine finish - dark grey

V-SURE Filler Dark Grey REF 64-17-105+BPO 2 KG


In stock

2 component very fine finishing putty based on polyester. Very well sandable with little shrinkage and dust formation during sanding. After curing, you get a completely tack free surface. Applicable on polyester (GRP) and metal.

Available in 2 kg and 9,7 kg (tube).

€23.01 / set


Very soft sandable putty with fine finish for unevenness in metal, GRP, wood, concrete or other putties. Can be finished with an appropriate varnish system.


  • Substrate must be dry, dust and grease free. 
  • Mix the polyester with 2-3% BPO hardener and apply with a spatula. 
  •  Potlife: 8-10 min. at 20°C. 
  •  Can already be sanded after 20-30 min.
  • Processing temperature: min. 10°C. 
  • After curing, resistant to temperatures up to 80°C.
  • Maximum recommended layer thickness is 5 mm.

Note: all polyesters can be slowed down with inhibitor.
Always provide appropriate protective clothing and gloves. Avoid prolonged skin contact. Cleaning agent for tools: cleaner M (environmentally friendly substitute for acetone).
This product contains styrene and must therefore be handled in accordance with the safety regulations.

Technical specifications

Download technical fiche