Polyester topcoat 1 kg - For a smooth polyester finish - Colourless
T35-1 transparent 1 KG
UPH01120487
In stock
Is a topcoat based on isophthalic and neopentylgycol acidic polyester resin, which after curing has good chemical, UV and highly water resistant properties.
Color pigment available separately to color in
Available in 1 kg, 5 kg, 20 kg and 220 kg containers.
€12.96 / st
Online advice 
Fast delivery from stock 
Guaranteed V-sure quality 
Direct from manufacturer - Pick-up 24/7 in pick-up box
Applications
Is a high-quality topcoat with very good mechanical properties. Is especially used for swimming ponds, water parks, boats, tanks etc. where high impact strength and good water and UV resistance are required.
Usage
The viscosity is set as standard for brush or roller application.Mix the topcoat thoroughly before use, avoid air bubbles under the resin. The temperature of the topcoat, the working area and the substrate should be 18-25°C. The air humidity should not exceed 85%. Add 2-3 % MEKP hardener. Make sure to mix thoroughly. Potlife is 15 min. at 20°C.Prepare small quantities according to the processing time.Note: All polyesters can be slowed down with inhibitor. The quantities in grams below are the same as in ml.| Polyester resin | 1% Mekp hardener | 2% Mekp hardener | 3% Mekp hardener |
| 100 gr | 1 gr | 2 gr | 3 gr |
| 250 gr | 2.5 gr | 5 gr | 7.5 gr |
| 1 kg | 10 gr | 20 gr | 30 gr |
| 5 kg | 50 gr | 100 gr | 150 gr |
Safety
Related products
Promo
