Wear resistant epoxy coating for floors - epoxy paint

Epoxy Eco Floor Paint 7000 A+B 15 KG


In stock

Is a 2 component solvent-free ( VOS <1%) silk gloss epoxy resin for sealing and protecting floors and walls. As a protective coating for concrete, cement, industrial asphalt and wood. Cures without sticking to the surface.

Available in 15 kg packaging. Standard in grey colour ( +- Ral 7000).

€288.40 / set


Used wherever an extremely wear-resistant floor coating is to be applied as a finish on various substrates. Due to the combination of extreme chemical and mechanical resistance, this coating meets the highest requirements.


  • Can best be applied in combination with a suitable primer (base coat). 
  • We recommend the 2K epoxy eco primer fast. Waiting time between layers of primer - floor paint: 6 hours at 8°C, 3 hours at 16°C and 1 hour at 25°C. 
  • Then mix both components of the epoxy eco paint in a 100/500 (1:5) weight ratio. 
  • The viscosity can be adjusted by adding 5-10% water. 
  • Potlife: 45 min. at 23°C. Dry after 24 hours. 
  •  Waiting time between coats: min. 12 hours at 23°C and max. 5 days. 
  • Processing temperature: 15-25°C. 
  • Fully cured after 5 days at 23°C. 
  • Apply with a brush or rol. 
  • Do not make too large quantities in one go because of the processing time.
  • Always provide appropriate protective clothing and gloves. 
  • Avoid prolonged skin contact. 
  • Cleaning agent for tools: cleaner M (environmentally friendly substitute for acetone).

Technical specifications

Download technical fiche