Elastic casting foam for filling hollow spaces 1 kg

PUR E60 A+B 1 KG


Deliverable in 1-5 working days

Is a 2-component elastic integral foam with closed cell structure. Should always be used in combination with B-component. After curing you get a tough elastic product with skin formation and a density of 60 kg/m³. Resistant to chemicals and diluted acids.

Available in 1 kg, 5 kg, 10 kg and 200 kg packs (A-component).

€26.80 / set



For filling hollow space insulation, sound insulation, seat cushions, mattresses and masks that must remain durable and elastic. Is paintable and can be coloured with 5% PUR pigment. Exposure to sunlight will discolour the material.

Attention: does not give homogeneous colours.


  • Mix the individual components thoroughly.
  • Mix both components in a 100/35 weight ratio and pour into the shape or area to be filled. 
  •  The potlife is approx. 25 sec. 
  •  The expansion is approx. 16 x the volume. 
  •  Dry after 15 min.
  • De-formable after 20 min. and fully hardened after 12 hours. 
  • Depending on the density, you can add more or less hardener (test first). 
  • Make sure that the processing temperature is between 20°C and 25°C. 
  • Mixing is best done with a mechanical mixer.
  • As a protective coating, our Protoflex or PU PN1707 inmold coating can be used. 
  • As release agent we recommend APW. 
  • Store the foam between 10° and 25°C because of frost sensitivity.

Always provide appropriate protective clothing and gloves. Avoid prolonged skin contact. The use of a carbon filter mask type A2 is recommended.
Cleaning agent for tools: cleaner M (environmentally friendly substitute for acetone).

container may be under pressure.

Technical specifications

Download technical fiche