Elastic gelcoat - inmould coating 600 g

PUR Inmould coating Fast Base A+B 600 G


Deliverable in 1-5 working days

Is a 2-component, paintable polyurethane inmould coating with low odour development and good chemical properties. Available in 600 gr packaging.

€38.53 / set


Can be used as a gelcoat (inmould coating) to be continued with another polyurethane. This product can be applied in 2 mm. without dripping. Can be coloured with 1-3 % PUR colourant.


Always ensure that the surface is as dry as possible. Mix the individual components well before use.Mixing ratio 100/20 by weight. Processing time: Approx. 10 min. Tack-free (1.5 mm.) after 6 hours. De-formable: depending on layer thickness 1 - 2 hours. Can be worked over with another polyurethane within 30 to 40 minutes. This gives a better adhesion between the layers.
Always provide appropriate protective clothing and gloves. Avoid prolonged skin contact. The use of a carbon filter mask type A2 is recommended. Cleaning agent for tools: cleaner M (environmentally friendly substitute for acetone).

Technical specifications

Download technical fiche