Polyester topcoat 1 kg - For a smooth polyester finish - RAL 9001

T35-1 9005 1 KG


In stock

Is a topcoat based on isophthalic and neopentylgycol acidic polyester resin, which after curing has good chemical, UV and highly water resistant properties. Available in 1 kg, 5 kg, 20 kg and 220 kg containers.

€13.72 / st



Is a high-quality topcoat with very good mechanical properties. Is especially used for swimming ponds, water parks, boats, tanks etc. where high impact strength and good water and UV resistance are required.


The viscosity is set as standard for brush or roller application.Mix the topcoat thoroughly before use, avoid air bubbles under the resin. The temperature of the topcoat, the working area and the substrate should be 18-25°C. The air humidity should not exceed 85%. Add 2-3 % MEKP hardener. Make sure to mix thoroughly. Potlife is 15 min. at 20°C.Prepare small quantities according to the processing time.Note: All polyesters can be slowed down with inhibitor. The quantities in grams below are the same as in ml.
Polyester resin
1% Mekp hardener
2% Mekp hardener
3% Mekp hardener
100 gr1 gr2 gr3 gr
250 gr2.5 gr5 gr7.5 gr
1 kg10 gr20 gr30 gr
5 kg50 gr100 gr150 gr
Always provide appropriate protective clothing and gloves. Avoid prolonged skin contact. Cleaning agent for tools: cleaner M (environmentally friendly substitute for acetone). This product contains styrene and must therefore be handled in accordance with the safety regulations.

Technical specifications

Download technical fiche