Polishing boat set
Boat polishing kit
Deliverable in 1-5 working days
Set for polishing your boat. This set contains: Treatment with C2 CLEANER, Treatment with S1 ONE STEP CUT & HIGH GLOSS, Treatment with S2 HOLOGRAM REMOVER, Treatment with S5 QUICK WAX and 1 x microfibre cloth
€73.05 / st
Set of different products for polishing and maintaining your boat.
UsageStep 1Cover the surface with water. Mix C2 CLEANER in a 1/10 ratio with water. Apply this mixture with a sponge and let it soak in for a few minutes. Afterwards, rinse thoroughly with water without letting it dry.Step 2 Ensure that the surface is dry and clean. Apply the S1 polishing paste with a polishing machine. Start with a low speed and then change to a higher one. Make fluent movements and do not polish too long on the same spot. Clean the surface with a microfibre cloth.Step 3Make sure the surface is dry and clean. Apply the S2 HOLOGRAM REMOVER with a microfibre cloth, polish thoroughly with rotating movements and light pressure. Can also be applied by machine.Step 4 Make sure the surface is dry and clean. Spray the S5 QUICK WAX onto the surface and rub out with a microfibre cloth, taking care not to let the wax dry out.
Always provide protective clothing and gloves. Avoid prolonged skin contact. Cleaning agent for tools: cleaner M (environmentally friendly substitute for acetone).