V-Sure logo
Request offer
Casting moulds and objects
Customer service
Request offer

Casting resins for casting shaped parts and objects

At V-Sure we have different types of resins available for casting moulded parts and objects.
Each type of resin has its own specific properties and areas of application.

Do you have a question about the use of a certain resin or about an application with a resin?
Check out the questions below and find out how V-Sure offers the ideal solution for your application.

On our inspiration pages you will find more info on making river tables and using epoxy resin for Resin Art.

Request your free offer

How to cast objects quickly with V-sure's casting resin?

Epoxy Clear Fast

Epoxy Clear Slow

Casting resin GTS

PUR dye

Polyester dye

There are several products you can use to cast moulded parts. But the most important thing is what or what result do you want to achieve? Are you looking for something colourless or coloured? Should it remain transparent or should you not be able to see through it? Does it have to be lightweight or very heavy? Should you be able to work on it afterwards, by sanding, milling or turning it?

If you wish to cast something colourless, you can use Epoxy Clear. This casting resin can be poured in thin or thick layers.

Would you like to cast something, e.g. a flower or an object, in a colourless resin? Then use Polyester GTS, a crystal-clear casting resin.

If you want to colour these resins with a transparent pigment, you should use the universal PU pigments. If it has to be translucent, work better with the polyester pigments when working with a polyester resin.

How do you determine the weight of casting resin?

Aerocell

Quartz sand

PU resin

If you wish to make your object lightweight, add Aerocell to your casting resin. This will make the volume swell and it will weigh less. Conversely, you can make your cast heavier by adding quartz sand. This results in so-called polymer concrete, which is up to four times stronger than regular concrete.

For easy sanding, milling or turning of your casting resin, we suggest using Epoxy Clear with sawdust, a wood-like resin that can be worked like softwood.

You also have the choice of a thin liquid, but very fast-curing casting polyurethane. This exists in different variants, in order to quickly, thinly and shrink-wrapped cast figures or shaped pieces.

How to cast and fill holes and cracks in damaged steps in concrete?

H30/Azur Laminating resin

Quartz sand

Polyester dye

We recommend reinforcing the liquid polyester resin H30-AZUR with fillers such as quartz sand. With this you can repair damaged concrete in any desired layer thickness. This by simply pouring. If you want a certain colour, you can add colour pigment to the mixture.

How do I fill joints and seams in concrete?

Flexovoss K6S

We recommend the grey-coloured, tough elastic casting resin type Flexovoss K6S. A 2-component polyurethane resin for casting joints, pits and holes in concrete or stone.

How to colourlessly fill irregularities in sandstone?

Casting resin GTS

PU dye

We recommend using the colourless casting resin type GTS, based on polyester. This transparent casting resin can be given the right colour with the universal PU pigments or with fillers like marble powder.

How to cast UV-resistant or crystal-clear electronic components of LED lighting?

Epoxy Clear Fast

Epoxy Clear Slow

We recommend a colourless 2-component casting resin such as Epoxy Clear. This can be used for casting and moulding LED lights as protection against weather influences and UV exposure.

How do I quickly cast model parts and 3D replicas?

PUR MC 6

Here we recommend the rapid casting resin MC6. A quick-drying, thin, liquid, 2-component polyurethane resin specifically for model making. Extremely suitable for casting thin layers.

How to colour polyester resin, epoxy resin or polyurethane?

PU dye

Polyester dye

Here we recommend working with the universal colour pigment that can be added to a transparent polyester, epoxy or polyurethane resin.

How to produce replicas and art objects with a wood-like structure?

Epoxy casting resin

Here we recommend the epoxy-based casting resin that can be mixed with sawdust. This is for casting objects with a wood-like structure or wood imitation.

How to embed photos and objects with casting resin?

Casting resin GTS

We recommend using the thin liquid casting resin GTS, based on polyester. This resin is crystal clear and can be coloured with the universal PU pigments. This for making jewellery and ornaments in a transparent resin or coloured in a translucent colour.

How to cast art objects with a porcelain structure?

Zellaan casting compound

We recommend casting the form pieces with Zellaan, a white powder that needs to be mixed with water in order to cold harden it into an extremely hard and wear-resistant porcelain structure. It is UV-resistant and water-resistant.

How to cast components electrically?

Flexovoss K6S

Here we recommend casting with Flexovoss K6S, a 2-component polyurethane and shrink-proof casting resin. This resin is solvent-free and can be cast without odour. It remains slightly tough elastic after curing and is perfectly water-resistant.

Casting small parts or moulded parts with a casting resin?

PUR MC5

Here we recommend using the thin liquid casting resin MC5, a 2-component resin based on polyurethane for casting moulded parts with a super fast cure. This is for example for casting prototypes.

How to cast and laminate with an epoxy resin?

Epoxy BK

Here we recommend the thin liquid epoxy resin type BK. This resin can be used as a primer, laminating resin and adhesive.

How do I waterproof electronic components on board?

Flexovoss K6S

Here we recommend the electrically insulating resin type K6S, for casting components which must be waterproof.

How to cast expansion joints or seams in stables?

Flexovoss K6S

Here we recommend using the tough elastic casting resin Flexovoss K6S. A 2-component, non-shrink casting resin for filling seams and cracks in concrete. It is permanently tough-elastic and makes good waterproofing.

How to cast ashes in an urn with transparent resin?

Casting resin GTS

Here we recommend using the crystal-clear casting resin GTS based on polyester. This highly transparent casting resin can be poured in almost any desired layer thickness.

How to cast a photo with resin?

Casting resin GTS

Here we recommend using the crystal-clear casting resin TSG based on polyester. This highly transparent resin can be poured in virtually any desired layer thickness.

How to colour lightless casting resin?

PU dye

We advise to use a very small amount of the universal PU pigment. This is available in different colours that can be mixed with each other and with the resin. Suitable for polyester, epoxy and polyurethane resin.

How to paint PVC with a quick-drying resin?

PUR MC6

Sandpaper P80

Here we recommend using the fast-drying casting resin PUR MC 6. After first sanding the PVC with a coarse sandpaper grain P80, you will obtain a perfect adhesion to the PVC pipe or plate.

How to cast parts with as little shrinkage as possible?

PUR MC12

With the MC12 you have a quick-casting polyurethane with a very low shrinkage.

With what can I cast in an alginate mould?

Zellaan casting compound

It is best to use water-based products such as Zellane. Polyester and epoxy cannot be used for this type of mould due to the high humidity of alginate.

How to cast fresh flowers with a colourless resin?

Casting resin GTS

We suggest GTS casting resin based on polyester.

Do you have casting resin for rapid prototyping?

PUR MC6

PU resin

PU dye

Here we recommend using the 2-component polyurethane rapid casting resin. We suggest PUR MC 6 as standard. This is a thin, liquid and fast-drying casting resin that can be coloured with PU pigments or filled with various fillers.

How to make jewellery with epoxy resins?

Casting resin GTS

PU dye

We recommend using the crystal clear casting resin type GTS. A thin liquid 2-component resin with improved UV resistance. It can be coloured with the universal PU pigments.

How to cast large volumes, such as a table in wood or stave, with epoxy?

Epoxy Clear Slow

Here we recommend our Epoxy Clear Slow. This is a crystal clear thin liquid and odourless casting epoxy with a very long processing time. This will allow you to cast virtually shrink free. This resin is extremely suitable for casting in larger volumes from 3 cm and up. Thanks to its unique composition, the resin will de-aerate and flatten itself spontaneously at the substrate. This reduces the risk of air bubbles and the need for polishing. Can be poured in quantities of 20 litres at once.

How to add a glossy layer to a photo, collage, canvas or puzzle?

Epoxy Glosscoat

The Epoxy Clear Fast is a crystal-clear casting epoxy. This is very suitable for thinner layers.

How to cast a kitchen worktop, countertop or bar top with epoxy?

Epoxy Clear Slow

Epoxy Clear Flex

Epoxy Clear Extra Slow

We suggest the Epoxy Clear. This is a crystal-clear, UV-resistant casting resin that is extremely scratch-resistant in use and can be poured in virtually any desired layer thickness. This casting resin from our assortment is extremely suitable for casting in both thin and thicker layers. Think for example of the casting of scaffolding wood or river tables. It is also suitable for application on wood, cardboard and photo material.

How to cast medals, badges or an emblem?

Epoxy Clear Fast

We recommend Glosscoat, a 2-component casting epoxy. With this, a crystal-clear, self-levelling layer of a few millimetres can be poured on. The addition of pigments allows the emblem to be coloured by the user.

How to cast a press paper in crystal-clear casting resin?

Casting resin GTS

We recommend using the crystal-clear casting resin GTS. This resin is based on a liquid polyester resin and should be processed in combination with the MEKP hardener.

How to cast the handle of a knife with resin?

PUR MC6

PU dye

We recommend the thin liquid casting resin MC6 based on polyurethane for. This can be coloured with the universal PU colour pigments.

How to make a rifle or pistol stock?

Epoxy Clear Fast

PU dye

If it has to be a wood like material, we suggest the casting epoxy to which you have to add sawdust. This mixture can easily be poured into a rubber mould.

How to cast a jewel in a rubber mould?

Epoxy BK

PU dye

Usually, one works with an epoxy resin BK that can be coloured with the universal PU pigments.

How to cast a stiletto heel in a transparent material?

Epoxy Clear Slow

PU dye

Here we recommend using the glass-clear casting resin type Clear. A thin liquid resin based on epoxy resin. Can be coloured with the Universal PU Pigments.

How to reproduce water as naturally as possible in a model?

Giethars GTS

We recommend using the crystal-clear casting resin type GTS. This should always be processed in combination with the MEKP hardener.

The many benefits of Epoxy Clear Resin from V-Sure

Epoxy Clear Slow

Epoxy Clear Fast

Epoxy Clear Flex

Epoxy Clear Extra Slow

V-Sure's Epoxy Clear resin has several advantages over standard epoxy casting resin.

  • Epoxy clear resin is odourless
  • Epoxy resin has a faster curing time
  • You have the possibility to cast thick layers
  • Clear and UV resistant casting system
  • Built-in UV stabiliser and blocker that prevents yellowing
  • Our Bio-Epoxies are food-safe

Epoxy Clear from V-Sure is slightly more expensive than for example epoxy resin. It also has a slightly lower mechanical strength and a temperature resistance of approximately 50°C.

How do you make an epoxy concrete?

Epoxy BK

Quartz sand

  • STEP 1 Prepare liquid epoxy resin type BK. Mix the resin with the hardener in a 100:60 weight ratio.
  • STEP 2: Mix a dry filler such as quartz sand under the liquid resin mixture. Always mix both components before adding sand. Mix approx. 1-8 parts by volume of sand with 1 part of resin. Always make the mixture as thick as possible. This prevents the resin from sagging.
  • STEP 3: Pouring or spraying the mixture.

Potlife: 30-45 min.
Always make small quantities in proportion to the potlife.
Ideal processing temperature: 18°c - 25°c

How to cast wooden boards and scaffolding wood?

Epoxy Clear Slow

Epoxy Clear Fast

We present the Epoxy Clear here. This is a crystal-clear, UV-resistant casting resin that is extremely scratch-resistant in use and can be poured in virtually any desired layer thickness. This casting resin from our assortment is extremely suitable for casting in both thin and thicker layers. Think for example of the casting of scaffolding wood or river tables. It is also suitable for application on wood, cardboard and photo material.

This website uses cookies to ensure the best experience possible. More information...